Beach Bum Custom Apparel Aftercare Instructions

Continuous Support Beyond Your Purchase – We’ve Got You Covered!

Welcome to Beach Bum Custom Apparel, the haven where quality intertwines with boundless creativity! Our heart and soul reside in the meticulous creation of vibrant tumblers, intricate embroidery, dynamic DTF, screen-printed masterpieces, and the cozy charm of mugs. However, our dedication surpasses the mere crafting phase. We’re fervently committed to ensuring that your Beach Bum treasures retain their allure long after they’ve entered your life.

These aftercare instructions aren’t just a routine; they embody our commitment to ensuring your satisfaction and the longevity of your cherished possessions. They signify our belief that each Beach Bum creation is more than just an item; it’s a story, a piece of art that deserves to be cherished and preserved. So, let our guidelines be your companion in nurturing your Beach Bum treasures, ensuring they remain a delightful part of your life’s narrative, ever fresh and fabulous!

Direct to Film (DTF) Printing Aftercare Guide:

Washing Instructions:

1. Gentle Cycle: When washing DTF printed clothing, use a gentle cycle setting on your washing machine.
2. Cold Water: Wash garments with cold water to preserve the vibrancy of the print.
3. Mild Detergent: Use a mild detergent to avoid any harsh chemicals that might affect the print quality.
4. Inside Out: Turn the garment inside out before washing to protect the printed surface.
5. Avoid Bleach and Harsh Chemicals: Steer clear of bleach or harsh chemicals that could fade or damage the DTF print.

Drying Guidelines:

1. Air Dry Preferred: Air drying is recommended to maintain print quality.
2. Low Heat Setting: If using a dryer, opt for a low heat setting to prevent excessive wear on the print.
3. Avoid Direct Sunlight: Dry garments away from direct sunlight to prevent fading.

Ironing and Steaming:

1. Low Heat: When ironing, use a low heat setting and avoid direct contact with the printed area.
2. Cover with Cloth: Place a clean cloth between the iron and the printed surface to protect the print.
3. Avoid Steam Directly on Print: If steaming, refrain from directing steam onto the printed area to prevent distortion or color bleeding.

Storage:

1. Fold Carefully: Fold DTF printed items carefully to avoid creases or damage to the print.
2. Avoid Compression: Avoid storing items in a way that compresses or stresses the printed areas.

General Care Tips:

1. Avoid Abrasion: Minimize friction or rubbing against rough surfaces to prevent print damage.
2. Handle with Care: Treat DTF printed items gently to maintain their quality and longevity.
3. Follow Specific Garment Care Labels: Adhere to specific care instructions provided on the garment label for optimal maintenance.

By following these aftercare instructions, you’ll help preserve the vividness and integrity of your DTF printed items, ensuring they stay vibrant and captivating over time.

Embroidery Aftercare Instructions:

Washing Guidelines:

1. Hand Wash Preferred: For embroidered clothing or items, hand washing is ideal for gentler care.
2. Use Mild Detergent: Use a mild detergent or soap to protect the embroidered threads.
3. Cold Water: Wash in cold water to preserve both the fabric and the embroidery.

Drying Recommendations:

1. Air Dry Flat: Lay embroidered items flat on a clean towel to air dry.
2. Avoid Sunlight: Dry away from direct sunlight to prevent potential fading of threads.
3. Shape Restoration: If needed, reshape the embroidered area while damp to maintain its original form.

Ironing and Steaming:

1. Low Heat Setting: Iron on the reverse side using a low heat setting to avoid damaging the embroidery.
2. Use a Pressing Cloth: Place a pressing cloth (a clean, thin fabric) over the embroidery before ironing to protect the threads.
3. Avoid Steam Directly on Embroidery: When steaming, ensure the steam doesn’t directly hit the embroidered area to prevent distortion.

Storage Advice:

1. Avoid Hanging: If possible, avoid hanging embroidered items for extended periods as it might distort the fabric or threads.
2. Fold Carefully: Fold neatly to prevent undue stress on the embroidered design.

General Care Tips:

1. Be Cautious with Abrasion: Minimize friction against rough surfaces to prevent thread snagging.
2. Check Garment Labels: Always refer to specific care labels attached to the garment for any special instructions.
3. Handle with Care: Treat embroidered items delicately to maintain the integrity of the design.

By adhering to these aftercare instructions, you can help preserve the intricate beauty and quality of your embroidered items for a longer duration, ensuring that the threads remain vibrant and the design retains its allure.

Sublimation Tumbler Aftercare Instructions:

Cleaning Process:

1. Hand Wash Recommended: Clean your sublimation tumbler by hand with a mild dishwashing soap.
2. Use Soft Sponge or Cloth: Use a soft sponge or cloth to gently scrub the surface, avoiding abrasive materials that may scratch the print.
3. Avoid Harsh Chemicals: Refrain from using harsh chemicals or abrasive cleaners that could damage the sublimation print.

Drying Technique:

1. Air Dry Upside Down: After washing, let the tumbler air dry upside down to prevent water spots or streaks on the print.
2. Pat Dry: If needed, pat the tumbler dry with a soft towel to remove excess moisture.

Avoid Extreme Conditions:

1. Avoid Extreme Temperatures: Don’t expose the tumbler to extreme temperatures, as this could affect the sublimation print quality.
2. Avoid Freezing or High Heat: Keep the tumbler away from freezing temperatures or excessive heat, as it might damage the print.

Avoid Impact or Scratches:

1. Handle with Care: Treat the tumbler with care to prevent scratches or dents that could compromise the print.
2. Avoid Dropping: Avoid dropping the tumbler, especially on hard surfaces, to maintain the print’s integrity.

Storage Recommendations:

1. Store in a Safe Place: Store the sublimation tumbler in a secure place, away from sharp objects or other items that could scratch the print.
2. Protect from Sunlight: When not in use, store the tumbler away from direct sunlight to prevent fading or discoloration.

General Maintenance:

1. Regular Check-Up: Periodically inspect the tumbler for any signs of wear or damage to the print.
2. Follow Manufacturer’s Instructions: Adhere to any specific care instructions provided by the manufacturer for optimal maintenance.

Following these aftercare instructions will help preserve the vibrant colors and quality of your sublimation printed tumbler, ensuring its longevity and continued aesthetic appeal.

Sublimation Mug Aftercare Instructions:

Hand Washing Method:

1. Gentle Hand Wash: Wash sublimation-printed mugs by hand using a mild dish soap and warm water.
2. Soft Sponge or Cloth: Use a soft sponge or cloth to clean the surface, avoiding abrasive materials that could scratch the print.
3. Avoid Harsh Chemicals: Steer clear of harsh cleaning agents that may affect the sublimation print quality.

Drying Technique:

1. Air Dry or Towel Dry: Allow the mug to air dry naturally or use a soft towel to gently dry it to prevent water spots.
2. Avoid Excessive Rubbing: Pat the mug dry instead of vigorously rubbing the printed surface to maintain its integrity.

Microwave and Dishwasher Caution:

1. Avoid Microwave: Sublimation-printed mugs are not microwave safe. Avoid heating them in the microwave to prevent damage to the print.
2. Hand Wash Only: Avoid placing these mugs in the dishwasher; hand washing is recommended for better preservation of the print.

Handling and Storage:

1. Handle with Care: Treat the mug gently to prevent accidental scratches or chips that could damage the print.
2. Avoid Stacking: Store sublimation mugs individually to prevent friction or scratches between them.

Sunlight and Extreme Conditions:

1. Protect from Sunlight: Store the mugs away from direct sunlight when not in use to prevent fading or discoloration of the print.
2. Avoid Extreme Temperatures: Keep the mugs away from extreme heat or freezing conditions to maintain the print quality.

Regular Check-Up:

1. Periodic Inspection: Regularly examine the mugs for any signs of wear, scratches, or fading on the printed surface.
2. Follow Manufacturer’s Instructions: Adhere to any specific care instructions provided by the manufacturer for optimal maintenance.

Following these aftercare guidelines will help preserve the vibrant colors and quality of the sublimation print on your mugs, ensuring they remain visually appealing for an extended period.

Questions or Concerns?

If you have any queries regarding the aftercare instructions provided or specific concerns about maintaining your Beach Bum Custom Apparel items, feel free to reach out to our dedicated support team. We’re here to assist you in preserving the beauty and quality of your cherished products. Contact us for any additional guidance or assistance you may need.